Important Note: Take time to thoroughly review the information as this step is critical for the proper functioning of the PetPass feature. The antenna sensor strip is designed to adhere only once. Attempting to remove and reposition it may result in damage and issue with Wifi/Bluetooth communication.
Temporary Setup: Use masking tape to temporarily install the antenna and find the optimal spot.
Positioning the Antenna:
The thin adhasive stip is the actual sensor. Do not cut it.
Attach the thin strip in the pocket between the door frame. The goal is to have the thin strip as far out in the pocket as possible when the door is closed. This placement is crucial for the antenna to receive signals from outside when the door is closed.
Watch the Video: Refer to the video for proper positioning of the antenna.
To prevent the white wire from dangling, utilize the organizer clips to fasten it in place.
Securing the Antenna:
Once you've found the optimal spot using masking tape, securely stick the antenna in place after a few days to ensure better performance.
Organize the Wire: Use the provided custom designed organizer clips to fasten the white cable in place and prevent it from dangling.