Brackets Marking

Standard Size SmartSlydr (Small/Medium/Large)

Refer to the below figure A for left moving panel and figure B for right moving panel and identify the location where to install SmartSlydr. Mark the position for two brackets (C), ensuring that they are approximately one foot from both ends of SmartSlydr.

If the sliding and fixed panels have similar dimensions, align one end of SmartSlydr with the fixed panel end. Refer the figure A and B.

However, if the fixed side is bigger, fully open the sliding panel and align the edge of the moving panel with the inner side of the SmartSlydr side cap. Refer the figure C.

Small end bracket can be install after the SmartSlydr is attached in step 1.4.a.

Custom Full Length SmartSlydr

Refer to figure D, mark for brackets in the middle of each panel.